Tellico4x4.com is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

How to Connect Bluetooth to Jeep Wrangler

how to connect bluetooth to jeep wrangler

Apart from having very impressive off-road features, the Jeep Wrangler also takes pride in its own advanced functionalities and features. In particular, the innovative Uconnect system where it provides tech features such as Bluetooth connectivity and many more.

But how to connect Bluetooth to Jeep Wrangler? The Bluetooth connectivity allows your smartphone to connect with the vehicle’s Uconnect system. Once connected, it will enable you to do many advanced features that revolve around your mobile phone.

How to Set Up Bluetooth in Jeep Wrangler

Setting up Bluetooth connectivity by connecting your mobile phone to the Jeep’s Uconnect system varies depending on the vehicle’s model. Some Jeep models come with a more advanced system with a touchscreen, while others come with a non-touchscreen Uconnect system.

For this guide, we will be connecting the mobile phone through a voice-activated Uconnect system. Check the step-by-step guide below:

Step 1: Preparing the Vehicle and the Mobile Phone

The initial step is to prepare your vehicle and mobile phone for connection or pairing. You will need to activate or turn on the Bluetooth of both the Jeep Wrangler and your mobile device. You will also need to ensure that the vehicle is stopped or parked.

Step 2: Making the Uconnect System Ready

The next step is to prepare the Uconnect system for the pairing process. You can press the phone icon, which is usually located on the bottom right corner of your Jeep’s monitor of the Uconnect system.

Step 3: The Pairing Process

In the pairing press, you will just have to follow the prompt stated on the monitor of the Uconnect system. Specifically, you will then be presented with a question the monitor asks if you want to pair a phone. Select “yes” by pressing the yes option on the monitor.

Step 4: Open Bluetooth Setting on your Smartphone

The next step is to get your mobile phone ready for pairing. Go to the Bluetooth settings while searching for the device to pair to. Once you see the Uconnect device, please select it.

After pressing, a PIN will pop up in the Uconnect system. All you have to do is select yes if they match. The Bluetooth pairing will now proceed with its connecting process. After a few moments, your phone will be directly connected.

How to Pair a Mobile Phone with a Non-touch Screen Uconnect System

how to set up bluetooth in jeep wrangler

There is not much difference in connecting a smartphone to a non-touchscreen Uconnect system of a Jeep Wrangler. But, to give you an overview, please check the step-by-step guide below:

Step 1: Preparing the Vehicle and the Mobile Phone

The first step is to prepare your vehicle and mobile phone for connection or pairing. You will need to activate or turn on the Bluetooth of both the Jeep Wrangler and your mobile device. You will also need to ensure that the vehicle is stopped or parked.

Step 2: Making the Uconnect System Ready

The next step is to prepare the Uconnect system for the pairing process. Since we are using the voice-activated feature of the vehicle, you can press the voice recognition button to get started.

Step 3: The Pairing Process

You need to activate the setup process of the Uconnect system by saying “Setup.” The voice-activated system will then say different options in the setup mode, including the Bluetooth pairing.

Select the Bluetooth pairing by saying “Bluetooth device pairing.” Then, the voice will again provide additional options in this mode. Select “Pair Device.” The voice-over will then ask for a PIN where you can select a set of four numbers of your choice. Say the number loudly for the Uconnect system to record.

The voice-over will then ask for the device’s name, which will be given to you by saying it loudly. The voice-over will ask additional confirmatory questions about the device’s name and its priority level number. Just answer it directly according to your preference.

Step 4: Post Pairing Procedure

Once the pairing process is done, the mobile device may take some time to connect. You will probably wait for a minute or two. Check your phone while going to the Bluetooth options and select the Uconnect or Wrangler as the device for pairing.

Once you press it, you will just wait for the voice-over to say that the pairing is complete. Once you get the confirmation, then your mobile phone is now connected to the Uconnect system of your Jeep Wrangler.

The Benefits of Bluetooth Connectivity and Uconnect

The UConnect system is a feature of your Jeep Wrangler that will allow you to use your phone while driving on the vehicle. It provides unique comfort and convenience that helps you get the maximum benefits of the vehicle.

Bluetooth is just one of the many features that the Uconnect system offers. Once your phone is connected to the vehicle through Bluetooth technology, you should be able to stream audio from your phone. It will also allow you to make essential calls hands-free and without you taking your eyes off the road.

Apart from the Bluetooth technology, there are also other unique features that the Uconnect system provides to all Jeep owners. One is the integrated voice command, Apple Carplay and Audio Integration System, Navigation, SiriusXM satellite radio, and a whole lot more.

Conclusion

Learning how to connect Bluetooth to a Jeep Wrangler is just one of the many pieces of information you need to know if you have a Jeep Wrangler. This vehicle is not all about off-road capabilities but other advanced features such as Bluetooth connectivity which allows you to use the mobile phone safely even if you are driving.

4.8/5 - (5 votes)

Leave a Comment