|
Advance Adapters Full Bellhousing Adapter Kit 23 Spline, 1-1/8th 10 Spline Input Shaft Dodge NV4500 To A Chevy V6 & V8 (AX15 & NV4500 Replacement)
The overall assembly length is 24.750. When performing an engine conversion at the same time as a NV4500 installation, driveline modifications are not normally required. Our new bellhousing uses a new external slave cylinder that bolts to the outside of the bellhousing. The bellhousing requires the installation of a new GM input shaft. NOTE: The installation of the new GM input shaft may require the transmission endplay to be reset.
When coupled to the AX15 or NV3550, the stock transfer case used a 23 spline input gear. If you obtain a 23 spline NV4500 the stock transfer case input gear can be retained. if you obtain a later model NV4500 transmission with a 29 spline output shaft, then we recommend kit 27-0011T which comes with a new 29 spline input gear for the New Process 231 transfer case.
The transfer case adapter is the shortest design possible to couple to the New Process transfer case. This adapter comes with a shifter bracket that allows the use of your stock transfer case shifter. Jeep TJ's require a different transfer case shifter bracket which can be switched out before shipping the kit. These packaged kits include a new support crossmember wich couples to the stock skid pan. Modifications will be required to your floorboard for the shifters, and the skid pan will require new holes to be drilled for our crossmember support. A Body lift is normally recommended for clearance. Due to the different transfer case shift controls found on Jeep Cherokees, this kit should not be used with these vehicles.
This kit is also supplied with a new external slave syllinder. When coupling this new slave cylinder to your stock master cylinder, you will be required to use one of the following clutch fittings, 716130 or 716130T. The correct fitting will depend on which configuration you have on your stock master cylinder.
Kit Includes: - 50-0204 - Transfer case adapter kit
- 52-0221 - GM 1 1/8 input shaft
- 712576 - Bellhousing kit
- 716008 - Crossmember mount
- 716130 - Hydraulic master cylinder fitting
- 716130H - 42" stainless hose -3 fitting
- 716331 - Jeep slave cylinder kit
- 716050D1 - Shifter handle assembly
|
